Electrician in Avondale, QLD
Electrical, solar and air conditioning in Avondale
Avondale is cane and farm country, so the work is on properties rather than in streets. A house may sit a long way from the road, with a machinery shed, a pump shed or a workshop spread across the block. Jobs here often cover more than one building, and we plan around the distance between them. We drive in along the farm track and look at the house, the sheds and the pole that brings the supply in before we say what is needed.
Access on an Avondale property is about gates, tracks and distance. Driveways can be long and unsealed, and after rain they can be soft, so tell us if a gate is locked or a dog is loose. The meter and main switchboard are often on a pole or a shed wall well away from the house, and the cable to the house runs underground or overhead. We measure that run and look at the cable size before we plan any new load.
Houses in Avondale are mostly freestanding homes on large blocks, many with wide verandahs, tin roofs and big roof areas for panels. Sheds often have the best roof, flat and clear of trees. Heat and storm exposure are higher out here, because little shades the roof and cyclone season winds cross open paddocks. That affects how we fix panels, where we place outdoor units and how a battery is housed.
What we do here most
What Avondale properties keep needing
On a rural block the real question is distance, from the road to the house and from the house to the shed.
Solar System Design
Planning solar across a house and a shed
An Avondale farm has a house roof shaded in the afternoon and a large machinery shed roof in full sun. We compare the two roofs, the distance back to the main switchboard and the size of the cable between them. The design settles which roof carries the panels and where the inverter sits, before any gear is ordered.
Solar Battery Storage
A battery for a long rural supply line
Properties on long rural lines can lose power when a storm comes through, and the farm still needs the pump, the fridge and the house lights. We list what has to keep running through a blackout and what can wait, then size the battery around that and the household's day. We explain which circuits it would hold up and which it would not.
Electrical Wiring
A new supply to a back paddock shed
A workshop shed a long way from the house needs lights, power points and a welder or compressor. We check the cable size and the voltage drop over the distance, and decide whether the cable runs overhead or underground in conduit. We install a sub board at the shed, test each circuit and the earthing, and label it.
Split System Air Conditioning
Cooling a farm office or sleepout
A sleepout or farm office on the block sits under tin with little insulation, and the owner wants one room cooled. We check which wall gets the least sun for the outdoor unit, how the pipes reach it, and whether the supply comes from a sub board or the house board. Then we fit the unit, test it and show you the controller.
If it is urgent
If the power drops out on the property
- 1Look at the switchboard at the house and at any shed board, and switch a tripped breaker or safety switch back on once only.
- 2Leave downed lines, wet cables and anything running to the street pole alone, and keep well clear of them.
- 3When you ring 0741 536 493, tell us the road, how far the house is from the gate, and whether any gates are locked.
Common questions
Frequently Asked Questions
What work do you do?
We do electrical, solar and air conditioning work. That covers Solar Panel Installation, Solar System Design, Solar Inverter Installation, Solar Battery Storage, Solar Battery Installation, Air Conditioning Installation, Split System Air Conditioning, Electrical Wiring and Electrical Maintenance. Each one has its own page on this site.
Which places do you work in?
We work in Bundaberg, Bundaberg Central, Walkervale, Svensson Heights, Woodgate, Kepnock, Moore Park, Bargara, Childers, Norville, Gin Gin and Avondale. If your property is somewhere else nearby, ring and ask, because the list is where we name our work rather than a hard boundary.
Do you work on both homes and businesses?
Yes. The work is much the same in principle, but a shop or an office usually has a bigger switchboard and more circuits to look at. Tell us which kind of property it is when you ring and we will plan the visit around that.
Can you come and look at the property before I decide?
Yes. We can visit to see the switchboard, the meter box, the roof or the wall where the new equipment would go, and talk through the options with you. Visits are booked by phone or through the form on the contact page.
Can you design a solar system around how my household uses power?
Yes, that is what Solar System Design is for. We look at the roof, the direction it faces, any shade, the switchboard and the meter, and talk with you about when the household uses most of its power. The layout is worked out from those things rather than from a standard package.
Can I add a battery to the solar system I already have?
In most cases, yes. We start by looking at the existing inverter and how the system is wired, because that decides which type of battery can be fitted and where it connects. Once that is clear, we talk through the options and where the battery would sit.
Will a battery keep my house running in a blackout?
It depends on how the battery and inverter are wired, because not every setup runs the house when the grid is off. Some are set up to feed only a few circuits, such as the fridge and lights, while others cover more. We explain which circuits would stay on before anything is fitted.
Does a solar system need approval before it is switched on?
Grid connected solar in Queensland needs an application to the local network, which around Bundaberg is Ergon Energy Network. It is dealt with as part of the job, and the system is switched on only once that is sorted out. We explain where yours is up to when we hand it over.
What is the difference between a split system and a ducted system?
A split system is one indoor unit on a wall, joined by pipework and cable to an outdoor unit, and it cools the room it sits in. A ducted system has one outdoor unit and ducts running through the roof space to vents in several rooms. We can talk through which suits your house after seeing the layout and the roof space.
Where do the indoor and outdoor units of an air conditioner go?
The indoor unit goes high on a wall with room to blow across the space. The outdoor unit sits on a bracket or a slab outside, as close as is sensible, and needs clear space around it so air can move. We check both positions, and the run of pipework between them, before any work starts.
Will my switchboard need work to take a new air conditioner or battery?
Sometimes, and sometimes not. We open the switchboard first and look at the main switch, the spare ways and the earthing, then tell you whether the new equipment can connect as it is. If the board needs work, we say so before the job starts.
What does electrical maintenance involve?
It starts with looking at what is already there: the switchboard, the switches, powerpoints and light fittings, and any equipment you are worried about. We test what we can reach and tell you what we find. If something needs replacing, we talk it through with you first.
Everything we do here
Services in Avondale, QLD
Every service we offer changes when the house, the shed and the supply pole are far apart, and Avondale jobs are planned around that.
Also nearby
We work in these areas too
Local, and on the phone
Planning work in Avondale
Tell us whether a meter pole or a shed switchboard feeds your house, and roughly how far it is from the house to the gate. That tells us how long the cable run is and what we need to bring.
0741 536 49324 hours a day, 7 days a week
Not urgent? Send us the job instead
