Electrician in Moore Park, QLD

Where we work in Moore Park

Moore Park Beach sits on the coast with cane paddocks behind it, and you notice both when you work here. The streets are quiet and mostly flat, and many houses are the homes of people who retired to the sea breeze years ago. Jobs tend to be steady, sensible upgrades. A roof gets panels, a back room gets cooled, or a switchboard that has served for decades is changed. Weather matters, because storms come in off the water and summer heat is humid.

Blocks are open and often large, with plenty of room to park a ute on the street or on the grass beside the house. The meter box is usually on a side wall or at the front boundary, and the switchboard sits on a verandah wall, in a laundry or in a garage. Dogs, caravans and sheds are common, so please tell us about gates and anything that blocks the path to the back of the house or the ladder.

Older beach homes here are mostly low set timber or fibro with iron roofs, and often a side room or an enclosed verandah added later. Those additions often run on a single extended circuit, and the roof over them may be a lower pitch than the main house. Salt air and humidity are hard on switchboards and outdoor units, and fibro sheeting from that era can contain asbestos, so we do not drill or cut it until we know what it is.

What we do here most

What Moore Park homes keep needing

The pattern here is an older home on a big open block that needs to cope better with storms and heat.

Solar Panel Installation

Panels on a low iron roof with a verandah

A beach home that has had a verandah or side room added usually has two roof sections at different pitches. We climb up and check the sheeting, the fixings and the roof timbers, and note which sections face the sun for the longest. We also note anything that shades the roof. The network connection application goes to Ergon Energy Network.

Solar Battery Storage

Keeping the fridge and fans running after a storm

When a storm takes the line down, a home on the edge of the village can be dark for a long time. We talk through which things you would want to keep running, such as the fridge, lights and a fan, and how a battery would be sized around them. We also look at whether your existing solar suits a battery at all.

Air Conditioning Installation

Cooling an enclosed verandah and the bedrooms off it

An enclosed verandah can turn into the hottest room in the house, with a bedroom or two opening onto it. We look at the room layout and decide whether one wall unit will do, or whether several indoor units off one outdoor unit would suit better. We also check the cable route and what the board can carry.

Electrical Wiring

Replacing an old board before adding new circuits

A fibro home with an old board often has no room left for a new circuit. We open the switchboard first and look at the main switch, the spare ways and the earthing. Then we trace the cable where we can reach it, and talk through whether to replace the board and add safety switches before anything new is connected.

If it is urgent

If the lights go out after a storm at your Moore Park home

  1. 1Look out of the window to see whether the neighbours also have no power, then check your switchboard for a dropped switch and push it up once.
  2. 2Leave any switch that trips again alone, keep clear of fallen lines and wet outdoor power points, and do not touch a damaged meter box.
  3. 3When you ring 0741 536 493, tell us the street, whether the house has solar, and what you noticed just before the power went.
Call 0741 536 493

Common questions

Frequently Asked Questions

What work do you do?

We do electrical, solar and air conditioning work. That covers Solar Panel Installation, Solar System Design, Solar Inverter Installation, Solar Battery Storage, Solar Battery Installation, Air Conditioning Installation, Split System Air Conditioning, Electrical Wiring and Electrical Maintenance. Each one has its own page on this site.

Which places do you work in?

We work in Bundaberg, Bundaberg Central, Walkervale, Svensson Heights, Woodgate, Kepnock, Moore Park, Bargara, Childers, Norville, Gin Gin and Avondale. If your property is somewhere else nearby, ring and ask, because the list is where we name our work rather than a hard boundary.

Do you work on both homes and businesses?

Yes. The work is much the same in principle, but a shop or an office usually has a bigger switchboard and more circuits to look at. Tell us which kind of property it is when you ring and we will plan the visit around that.

Can you come and look at the property before I decide?

Yes. We can visit to see the switchboard, the meter box, the roof or the wall where the new equipment would go, and talk through the options with you. Visits are booked by phone or through the form on the contact page.

Can you design a solar system around how my household uses power?

Yes, that is what Solar System Design is for. We look at the roof, the direction it faces, any shade, the switchboard and the meter, and talk with you about when the household uses most of its power. The layout is worked out from those things rather than from a standard package.

Can I add a battery to the solar system I already have?

In most cases, yes. We start by looking at the existing inverter and how the system is wired, because that decides which type of battery can be fitted and where it connects. Once that is clear, we talk through the options and where the battery would sit.

Will a battery keep my house running in a blackout?

It depends on how the battery and inverter are wired, because not every setup runs the house when the grid is off. Some are set up to feed only a few circuits, such as the fridge and lights, while others cover more. We explain which circuits would stay on before anything is fitted.

Does a solar system need approval before it is switched on?

Grid connected solar in Queensland needs an application to the local network, which around Bundaberg is Ergon Energy Network. It is dealt with as part of the job, and the system is switched on only once that is sorted out. We explain where yours is up to when we hand it over.

What is the difference between a split system and a ducted system?

A split system is one indoor unit on a wall, joined by pipework and cable to an outdoor unit, and it cools the room it sits in. A ducted system has one outdoor unit and ducts running through the roof space to vents in several rooms. We can talk through which suits your house after seeing the layout and the roof space.

Where do the indoor and outdoor units of an air conditioner go?

The indoor unit goes high on a wall with room to blow across the space. The outdoor unit sits on a bracket or a slab outside, as close as is sensible, and needs clear space around it so air can move. We check both positions, and the run of pipework between them, before any work starts.

Will my switchboard need work to take a new air conditioner or battery?

Sometimes, and sometimes not. We open the switchboard first and look at the main switch, the spare ways and the earthing, then tell you whether the new equipment can connect as it is. If the board needs work, we say so before the job starts.

What does electrical maintenance involve?

It starts with looking at what is already there: the switchboard, the switches, powerpoints and light fittings, and any equipment you are worried about. We test what we can reach and tell you what we find. If something needs replacing, we talk it through with you first.

Local, and on the phone

Tell us about your Moore Park home

Tell us which way the roof faces, what shades it and roughly how steep it is. That decides how we plan the visit.

0741 536 493

24 hours a day, 7 days a week

Not urgent? Send us the job instead