Electrician in Norville, QLD
Electrical, solar and air conditioning in Norville
Norville is a spread of residential streets beside Walkervale and Svensson Heights, so our work here is almost always inside an established house or on its roof. Calls tend to start with something that has worn out, an air conditioner that no longer cools or a board that keeps tripping, and grow into a bigger job once we see the house. Often it is a household that has lived in the same place a long time and now wants it made comfortable.
Most Norville houses sit on standard blocks with a driveway down one side and a gate to the back yard. The meter box is usually on the side wall, and the switchboard is either in the same box or on the carport wall. Where a house has a second driveway or a shed at the back, we check the route from the meter before planning any new cable. A ladder is usually enough for the roof, and we ask you to move cars and outdoor furniture clear of the side access.
Older Norville houses are often low set with tin roofs, which makes a split system work hard on summer afternoons and leaves little room in the roof for ducting. Newer slab homes have more ceiling space, so ducted and multi head air conditioning is easier to run through them. On both kinds, the switchboard decides how much new load the house can take, so we look at it first. Roof pitch and trees on neighbouring blocks decide where panels can sit without shade.
What we do here most
What Norville homes keep needing
Norville houses are lived in for years, so the work is usually about making an existing house cope with more load.
Air Conditioning Installation
Cooling the bedrooms of a newer slab home
A newer slab home in Norville has a large ceiling space but only one unit in the living room, and the bedrooms stay hot. We look at the roof space, the positions for the indoor units or ducts, the spot for the outdoor unit and the circuit the system will need. Then we run the pipes and ducts, connect and test each room, and explain the controls.
Solar Panel Installation
Panels on a tin roof beside tall trees
A Norville house has a good roof face, but a tall tree on the neighbouring block throws shade over one side. We stand in the yard and look at where the shade falls, then walk the roof to check the sheets, the fixings and the room for rails. Panels go where the sun is, the connection application to Ergon Energy Network is part of the job, and we test before handover.
Electrical Maintenance
A safety switch that keeps tripping
The safety switch trips whenever it rains or the dryer runs, and the household has stopped resetting it. We switch circuits off one at a time and test each one, starting with the outdoor lights, the laundry and the power points on the outside walls. When we find the circuit at fault, we repair or replace what is damaged and test the switch again.
Electrical Wiring
Power and lights for a back yard sleepout
A household in Norville has built a sleepout behind the house and needs lights, power points and a fan. We trace the supply back to the switchboard, check there is a spare way for the new circuit, and run the cable through the roof or under the floor. We fit the points and switches and test the circuit.
If it is urgent
If the power keeps tripping in the house
- 1Unplug the appliances on the circuit that tripped, then switch the safety switch back on once only.
- 2Leave the switchboard cover, wet power points and any warm or smelly fitting alone.
- 3When you ring 0741 536 493, tell us which circuit tripped, what was running, and whether the house is low set or a slab build.
Common questions
Frequently Asked Questions
What work do you do?
We do electrical, solar and air conditioning work. That covers Solar Panel Installation, Solar System Design, Solar Inverter Installation, Solar Battery Storage, Solar Battery Installation, Air Conditioning Installation, Split System Air Conditioning, Electrical Wiring and Electrical Maintenance. Each one has its own page on this site.
Which places do you work in?
We work in Bundaberg, Bundaberg Central, Walkervale, Svensson Heights, Woodgate, Kepnock, Moore Park, Bargara, Childers, Norville, Gin Gin and Avondale. If your property is somewhere else nearby, ring and ask, because the list is where we name our work rather than a hard boundary.
Do you work on both homes and businesses?
Yes. The work is much the same in principle, but a shop or an office usually has a bigger switchboard and more circuits to look at. Tell us which kind of property it is when you ring and we will plan the visit around that.
Can you come and look at the property before I decide?
Yes. We can visit to see the switchboard, the meter box, the roof or the wall where the new equipment would go, and talk through the options with you. Visits are booked by phone or through the form on the contact page.
Can you design a solar system around how my household uses power?
Yes, that is what Solar System Design is for. We look at the roof, the direction it faces, any shade, the switchboard and the meter, and talk with you about when the household uses most of its power. The layout is worked out from those things rather than from a standard package.
Can I add a battery to the solar system I already have?
In most cases, yes. We start by looking at the existing inverter and how the system is wired, because that decides which type of battery can be fitted and where it connects. Once that is clear, we talk through the options and where the battery would sit.
Will a battery keep my house running in a blackout?
It depends on how the battery and inverter are wired, because not every setup runs the house when the grid is off. Some are set up to feed only a few circuits, such as the fridge and lights, while others cover more. We explain which circuits would stay on before anything is fitted.
Does a solar system need approval before it is switched on?
Grid connected solar in Queensland needs an application to the local network, which around Bundaberg is Ergon Energy Network. It is dealt with as part of the job, and the system is switched on only once that is sorted out. We explain where yours is up to when we hand it over.
What is the difference between a split system and a ducted system?
A split system is one indoor unit on a wall, joined by pipework and cable to an outdoor unit, and it cools the room it sits in. A ducted system has one outdoor unit and ducts running through the roof space to vents in several rooms. We can talk through which suits your house after seeing the layout and the roof space.
Where do the indoor and outdoor units of an air conditioner go?
The indoor unit goes high on a wall with room to blow across the space. The outdoor unit sits on a bracket or a slab outside, as close as is sensible, and needs clear space around it so air can move. We check both positions, and the run of pipework between them, before any work starts.
Will my switchboard need work to take a new air conditioner or battery?
Sometimes, and sometimes not. We open the switchboard first and look at the main switch, the spare ways and the earthing, then tell you whether the new equipment can connect as it is. If the board needs work, we say so before the job starts.
What does electrical maintenance involve?
It starts with looking at what is already there: the switchboard, the switches, powerpoints and light fittings, and any equipment you are worried about. We test what we can reach and tell you what we find. If something needs replacing, we talk it through with you first.
Everything we do here
Services in Norville, QLD
These are the services we most often bring to Norville houses, whether they are older low set homes or newer slab builds.
Also nearby
We work in these areas too
Local, and on the phone
Planning work in Norville
Tell us whether your house is low set or a slab build, and what shades the roof. That helps us plan before we visit.
0741 536 49324 hours a day, 7 days a week
Not urgent? Send us the job instead
