Split System Air Conditioning in Bundaberg, QLD
What is included
What Is Included in Our Split System Air Conditioning
- We choose a high spot on the wall for the indoor unit, with clear space for the air to flow.
- We find the shortest tidy route for the pipes through the wall to where the outdoor unit will stand.
- We check the stud positions, then drill a core through the wall and fix the indoor unit's mounting plate.
- We set the outdoor unit on a bracket or a pad, level, with room around it to breathe.
- We join the pipes, run the drain so it falls away from the wall and wrap the pipework neatly.
- We wire the outdoor unit to a circuit at the switchboard and fit an isolating switch beside it.
- We vacuum the pipes, open the valves and run the unit, checking the drain actually runs.
- We remove an old split if there is one, clean up the room and show you the remote.
Why us
Why Choose Us for Split System Air Conditioning?
Accountable for every job, long after the day
Every split system air conditioning job is done by the people who will still be here next year.
Tested and signed off before we leave
Everything we touch on your split system air conditioning is tested before we go, you get walked through exactly what was done.
Local electricians, not a call centre
An electrician answers the phone and the same faces come back if the job runs over a day.
How the job runs
One wall unit, put in the right spot
The first phone call
Tell us which room, how big it feels and whether a unit is there already. A replacement in the same spot is simpler than a new position. We ask what the outside wall is made of and whether the outdoor unit could stand on the ground or has to hang on a bracket.
Choosing the spot on the wall
We stand in the room with you and look at where the air would travel. We check the outside wall for where the pipes exit and the outdoor unit can sit, and the switchboard for room for a new circuit. Then we talk through the options for unit size and position.
Fitting day and handover
We mount the plate, core the wall, join the pipes and hang the indoor unit. The outdoor unit goes on its bracket and is wired in. We test, check the drain, remove any old unit and show you the remote.
Common questions
Frequently Asked Questions
What work do you do?
We do electrical, solar and air conditioning work. That covers Solar Panel Installation, Solar System Design, Solar Inverter Installation, Solar Battery Storage, Solar Battery Installation, Air Conditioning Installation, Split System Air Conditioning, Electrical Wiring and Electrical Maintenance. Each one has its own page on this site.
Which places do you work in?
We work in Bundaberg, Bundaberg Central, Walkervale, Svensson Heights, Woodgate, Kepnock, Moore Park, Bargara, Childers, Norville, Gin Gin and Avondale. If your property is somewhere else nearby, ring and ask, because the list is where we name our work rather than a hard boundary.
Do you work on both homes and businesses?
Yes. The work is much the same in principle, but a shop or an office usually has a bigger switchboard and more circuits to look at. Tell us which kind of property it is when you ring and we will plan the visit around that.
Can you come and look at the property before I decide?
Yes. We can visit to see the switchboard, the meter box, the roof or the wall where the new equipment would go, and talk through the options with you. Visits are booked by phone or through the form on the contact page.
Can you design a solar system around how my household uses power?
Yes, that is what Solar System Design is for. We look at the roof, the direction it faces, any shade, the switchboard and the meter, and talk with you about when the household uses most of its power. The layout is worked out from those things rather than from a standard package.
Can I add a battery to the solar system I already have?
In most cases, yes. We start by looking at the existing inverter and how the system is wired, because that decides which type of battery can be fitted and where it connects. Once that is clear, we talk through the options and where the battery would sit.
Will a battery keep my house running in a blackout?
It depends on how the battery and inverter are wired, because not every setup runs the house when the grid is off. Some are set up to feed only a few circuits, such as the fridge and lights, while others cover more. We explain which circuits would stay on before anything is fitted.
Does a solar system need approval before it is switched on?
Grid connected solar in Queensland needs an application to the local network, which around Bundaberg is Ergon Energy Network. It is dealt with as part of the job, and the system is switched on only once that is sorted out. We explain where yours is up to when we hand it over.
What is the difference between a split system and a ducted system?
A split system is one indoor unit on a wall, joined by pipework and cable to an outdoor unit, and it cools the room it sits in. A ducted system has one outdoor unit and ducts running through the roof space to vents in several rooms. We can talk through which suits your house after seeing the layout and the roof space.
Where do the indoor and outdoor units of an air conditioner go?
The indoor unit goes high on a wall with room to blow across the space. The outdoor unit sits on a bracket or a slab outside, as close as is sensible, and needs clear space around it so air can move. We check both positions, and the run of pipework between them, before any work starts.
Will my switchboard need work to take a new air conditioner or battery?
Sometimes, and sometimes not. We open the switchboard first and look at the main switch, the spare ways and the earthing, then tell you whether the new equipment can connect as it is. If the board needs work, we say so before the job starts.
What does electrical maintenance involve?
It starts with looking at what is already there: the switchboard, the switches, powerpoints and light fittings, and any equipment you are worried about. We test what we can reach and tell you what we find. If something needs replacing, we talk it through with you first.
Related work
Other jobs we get called out for
solar battery installation
We do the physical job of fitting a battery to a solar system you already have, or adding one while new solar goes in.
Read moreelectrical wiring
We run new cable and fit points, lights and circuit protection for new builds, renovations and rewires, then test every circuit.
Read moreelectrical maintenance
We test your switchboard, safety switches, smoke alarms and wiring, find faults while they are small, and repair what needs it.
Read moreServing Bundaberg and The Surrounding Areas
Where we work
Ready when you are
Book Split System Air Conditioning in Bundaberg Today
Tell us which wall you would like the unit on and what sits on the other side of it. That shows us where the outdoor unit could go.
0741 536 49324 hours a day, 7 days a week
Not urgent? Send us the job instead
