Electrical Maintenance in Bundaberg, QLD
What is included
What Is Included in Our Electrical Maintenance
- We ask what has been tripping, flickering or running hot, and walk to each place with you.
- We open the switchboard and look for loose connections, discoloured breakers, scorch marks and signs of heat.
- We test every safety switch with a meter and by pressing its test button.
- We scan the switchboard with a thermal camera while it is under load to find hot connections.
- We check power points, light fittings and visible wiring around the house, including the outdoor and wet areas.
- We test each smoke alarm, and replace any that are old, faulty or do not sound.
- We repair or replace damaged parts we find, such as cracked points or failed breakers, once you agree.
- We refit covers, switch everything back on, and tell you plainly what we found and what can wait.
Why us
Why Choose Us for Electrical Maintenance?
Accountable for every job, long after the day
Every electrical maintenance job is done by the people who will still be here next year.
Tested and signed off before we leave
Everything we touch on your electrical maintenance is tested before we go, you get walked through exactly what was done.
Local electricians, not a call centre
An electrician answers the phone and the same faces come back if the job runs over a day.
How the job runs
Maintenance finds problems while they are small
The first phone call
Tell us what prompted it, whether it is a breaker that keeps tripping, a hot smell or just that the board has never been looked at. We ask when the wiring was last touched and if a business runs from the premises. That sets how long the visit takes.
Testing the board and circuits
We start at the switchboard, then test safety switches and circuits and scan with the thermal camera. We look at the points, lights and smoke alarms around the building. We talk through the options for anything that needs repair or an upgrade, and what can wait.
Repairs and handover
Where you agree, and where we have the part with us, we fix what we found, switching off only the circuits we must. We refit covers, switch everything back on and test again. Before we go we tell you in plain language what we found and what we did.
Common questions
Frequently Asked Questions
What work do you do?
We do electrical, solar and air conditioning work. That covers Solar Panel Installation, Solar System Design, Solar Inverter Installation, Solar Battery Storage, Solar Battery Installation, Air Conditioning Installation, Split System Air Conditioning, Electrical Wiring and Electrical Maintenance. Each one has its own page on this site.
Which places do you work in?
We work in Bundaberg, Bundaberg Central, Walkervale, Svensson Heights, Woodgate, Kepnock, Moore Park, Bargara, Childers, Norville, Gin Gin and Avondale. If your property is somewhere else nearby, ring and ask, because the list is where we name our work rather than a hard boundary.
Do you work on both homes and businesses?
Yes. The work is much the same in principle, but a shop or an office usually has a bigger switchboard and more circuits to look at. Tell us which kind of property it is when you ring and we will plan the visit around that.
Can you come and look at the property before I decide?
Yes. We can visit to see the switchboard, the meter box, the roof or the wall where the new equipment would go, and talk through the options with you. Visits are booked by phone or through the form on the contact page.
Can you design a solar system around how my household uses power?
Yes, that is what Solar System Design is for. We look at the roof, the direction it faces, any shade, the switchboard and the meter, and talk with you about when the household uses most of its power. The layout is worked out from those things rather than from a standard package.
Can I add a battery to the solar system I already have?
In most cases, yes. We start by looking at the existing inverter and how the system is wired, because that decides which type of battery can be fitted and where it connects. Once that is clear, we talk through the options and where the battery would sit.
Will a battery keep my house running in a blackout?
It depends on how the battery and inverter are wired, because not every setup runs the house when the grid is off. Some are set up to feed only a few circuits, such as the fridge and lights, while others cover more. We explain which circuits would stay on before anything is fitted.
Does a solar system need approval before it is switched on?
Grid connected solar in Queensland needs an application to the local network, which around Bundaberg is Ergon Energy Network. It is dealt with as part of the job, and the system is switched on only once that is sorted out. We explain where yours is up to when we hand it over.
What is the difference between a split system and a ducted system?
A split system is one indoor unit on a wall, joined by pipework and cable to an outdoor unit, and it cools the room it sits in. A ducted system has one outdoor unit and ducts running through the roof space to vents in several rooms. We can talk through which suits your house after seeing the layout and the roof space.
Where do the indoor and outdoor units of an air conditioner go?
The indoor unit goes high on a wall with room to blow across the space. The outdoor unit sits on a bracket or a slab outside, as close as is sensible, and needs clear space around it so air can move. We check both positions, and the run of pipework between them, before any work starts.
Will my switchboard need work to take a new air conditioner or battery?
Sometimes, and sometimes not. We open the switchboard first and look at the main switch, the spare ways and the earthing, then tell you whether the new equipment can connect as it is. If the board needs work, we say so before the job starts.
What does electrical maintenance involve?
It starts with looking at what is already there: the switchboard, the switches, powerpoints and light fittings, and any equipment you are worried about. We test what we can reach and tell you what we find. If something needs replacing, we talk it through with you first.
Related work
Other jobs we get called out for
solar panel installation
We fit solar panels to your roof, wire them into your switchboard and test the whole system before we hand it over to you.
Read moresolar system design
We work out what solar suits your house, from the roof faces and shade to the inverter position and room for a battery later.
Read moresolar inverter installation
We fit a new inverter or replace an old one, wiring the panel strings in on the DC side and the switchboard on the AC side.
Read moreServing Bundaberg and The Surrounding Areas
Where we work
Ready when you are
Book Electrical Maintenance in Bundaberg Today
Tell us which breaker trips or which room has the problem, and what was running when it happened.
0741 536 49324 hours a day, 7 days a week
Not urgent? Send us the job instead
