Electrician in Bundaberg, QLD

Where we work across Bundaberg

Our work in Bundaberg rarely stays in one street. A morning can start at a house in a newer estate on the edge of town, move to a shed on a block where the cane begins, and end at an older home near the river. We are based on McLean Street in the middle of the city, and the first phone call is where we sort out what to bring. A few questions about the roof, the board and the access mean the right gear is on the truck before we arrive.

Blocks vary a great deal across the city. Older streets have narrow side access, a fence and a gate, sometimes with a dog behind it. Newer estates have smaller yards, open frontages and a meter box set into the front wall. On bigger blocks toward the cane the driveway can be long, gravel and dusty, and the main switchboard may sit on a shed wall rather than the house. Before the day we want to know where the meter box is, whether it is locked, and where a ladder can stand on level ground.

Housing runs from timber homes raised on stumps, to post war fibro and brick, to newer brick and tile houses with low ceilings and big living areas. Each answers differently. Older timber homes often have old wiring and a small switchboard. Newer homes have more roof area facing two or three ways and rooms laid out for ducted cooling. All of it has to cope with long hot summers, humid air and storm season, so we choose fixings, cable routes and outdoor unit positions with that weather in mind.

What we do here most

What Bundaberg properties keep asking for

The four jobs below share one pattern: a Bundaberg property is often bigger and more varied than the house alone.

Solar System Design

Planning solar around a house and a big shed

Many blocks at the edge of the city have a house and a shed or carport with a long roof. We look at which roof gets the sun through the afternoon, where trees and neighbours cast shade, and where the cable can run back to the switchboard. Sometimes the shed roof is the better place. We go through the options with you before anything is fixed down.

Solar Battery Storage

Sizing a battery around a storm blackout

Storms and cyclone season can take the power out across a whole street. A battery helps most when it is sized around what you actually want running, such as the fridge, the lights and a fan, rather than the whole house. We ask which circuits matter most and how your evenings usually go. Then we talk through what a battery can and cannot cover.

Electrical Wiring

Power and lighting for a shed or granny flat

A shed, workshop or granny flat out the back needs its own circuit run from the main switchboard, often in conduit along a fence line or underground. We check there is a spare way in the board and that the board can take the extra load. Then we work out where the cable can run without crossing a driveway or a garden tap. Every circuit is tested before handover.

Air Conditioning Installation

Cooling several rooms in a newer brick home

Newer houses on the estates often have a long open living area with bedrooms off a hallway. We look into the roof space for ducting, check the ceiling heights and find where an outdoor unit can sit without blocking the side path. Some homes suit a ducted system and some suit wall units in the main rooms. We talk through both with you.

If it is urgent

If the power goes out at your Bundaberg property

  1. 1Check whether your neighbours have power too, then look at the safety switches in your switchboard and push up any that have dropped, once only.
  2. 2Leave wet or damaged wiring, flooded power points and anything that has sparked alone, and do not keep resetting a switch that trips again.
  3. 3When you ring 0741 536 493 in opening hours, tell us the suburb, whether it is a house, a shed or a business, and where the meter box and switchboard are.
Call 0741 536 493

Common questions

Frequently Asked Questions

What work do you do?

We do electrical, solar and air conditioning work. That covers Solar Panel Installation, Solar System Design, Solar Inverter Installation, Solar Battery Storage, Solar Battery Installation, Air Conditioning Installation, Split System Air Conditioning, Electrical Wiring and Electrical Maintenance. Each one has its own page on this site.

Which places do you work in?

We work in Bundaberg, Bundaberg Central, Walkervale, Svensson Heights, Woodgate, Kepnock, Moore Park, Bargara, Childers, Norville, Gin Gin and Avondale. If your property is somewhere else nearby, ring and ask, because the list is where we name our work rather than a hard boundary.

Do you work on both homes and businesses?

Yes. The work is much the same in principle, but a shop or an office usually has a bigger switchboard and more circuits to look at. Tell us which kind of property it is when you ring and we will plan the visit around that.

Can you come and look at the property before I decide?

Yes. We can visit to see the switchboard, the meter box, the roof or the wall where the new equipment would go, and talk through the options with you. Visits are booked by phone or through the form on the contact page.

Can you design a solar system around how my household uses power?

Yes, that is what Solar System Design is for. We look at the roof, the direction it faces, any shade, the switchboard and the meter, and talk with you about when the household uses most of its power. The layout is worked out from those things rather than from a standard package.

Can I add a battery to the solar system I already have?

In most cases, yes. We start by looking at the existing inverter and how the system is wired, because that decides which type of battery can be fitted and where it connects. Once that is clear, we talk through the options and where the battery would sit.

Will a battery keep my house running in a blackout?

It depends on how the battery and inverter are wired, because not every setup runs the house when the grid is off. Some are set up to feed only a few circuits, such as the fridge and lights, while others cover more. We explain which circuits would stay on before anything is fitted.

Does a solar system need approval before it is switched on?

Grid connected solar in Queensland needs an application to the local network, which around Bundaberg is Ergon Energy Network. It is dealt with as part of the job, and the system is switched on only once that is sorted out. We explain where yours is up to when we hand it over.

What is the difference between a split system and a ducted system?

A split system is one indoor unit on a wall, joined by pipework and cable to an outdoor unit, and it cools the room it sits in. A ducted system has one outdoor unit and ducts running through the roof space to vents in several rooms. We can talk through which suits your house after seeing the layout and the roof space.

Where do the indoor and outdoor units of an air conditioner go?

The indoor unit goes high on a wall with room to blow across the space. The outdoor unit sits on a bracket or a slab outside, as close as is sensible, and needs clear space around it so air can move. We check both positions, and the run of pipework between them, before any work starts.

Will my switchboard need work to take a new air conditioner or battery?

Sometimes, and sometimes not. We open the switchboard first and look at the main switch, the spare ways and the earthing, then tell you whether the new equipment can connect as it is. If the board needs work, we say so before the job starts.

What does electrical maintenance involve?

It starts with looking at what is already there: the switchboard, the switches, powerpoints and light fittings, and any equipment you are worried about. We test what we can reach and tell you what we find. If something needs replacing, we talk it through with you first.

Local, and on the phone

Tell us about your Bundaberg property

Tell us which road your house or shed is on and whether the meter box is at the front. That shows us how we will reach the roof and the switchboard.

0741 536 493

24 hours a day, 7 days a week

Not urgent? Send us the job instead