Electrician in Bargara, QLD

Where we work in Bargara

Bargara is the biggest and newest of the coastal suburbs, and it keeps growing. There are older beach houses near the Esplanade and Kelly's Beach, but most of the work is in newer estates and larger homes that spread back from the water. Many have been built or renovated recently, so the jobs are often about adding to a modern house rather than repairing an old one. Owners usually want something finished neatly, with the cabling hidden and the outdoor equipment out of sight.

Newer blocks are smaller and closer together than the older beach streets, with a double garage, a short driveway and a fence along the side. Access along the side of the house can be narrow, and a two storey home needs a taller ladder or scaffold to reach the roof. The meter box is often in a cabinet by the front boundary or on the garage wall, and the switchboard is usually in the garage or a utility cupboard.

The housing is a mix of brick and rendered homes, some with tile roofs and some with metal, often with several roof planes, hips and valleys. Open plan living rooms with high ceilings are common, which changes how air conditioning is planned. Boards in newer homes are usually tidy and already carry safety switches, though they can be full. Salt air still reaches the streets near the water, so we choose fixings and outdoor units with that in mind.

What we do here most

What Bargara homes keep needing

The pattern here is a modern home with a complicated roof and a big open living area that wants to be comfortable and self reliant.

Solar System Design

Fitting panels around hips and valleys on two storeys

A modern roof with several planes and a shaded side needs a layout drawn up before anyone climbs a ladder. We look at which faces catch the sun and where the roof is overshadowed by the next house. Then we plan where the inverter will go and how the cable will travel inside the walls so nothing shows from the street.

Air Conditioning Installation

Cooling an open plan living area with high ceilings

A tall open room cools differently from a small bedroom. We look at how the living area flows into the kitchen and the stairs, and talk through whether ducted or multi head suits the house better. We check the roof space for duct room or the wall for a safe pipe run, and make sure the board can carry the load.

Solar Battery Installation

Adding a battery to a system on the roof

Many Bargara homes already have panels, and the owner now wants a battery beside the inverter. We check the existing inverter and the board, and choose a wall spot, usually in the garage, with room around it and out of the sun. Then we fit it, connect it to the system, and test it before handover.

Electrical Maintenance

Salt tired outdoor lights and power near the water

Outdoor lights, power points and gate motors near the esplanade take salt spray all year. We check each one for rust, water inside and cracked seals, and test the safety switch that protects them. Anything past saving is replaced with something suited to the position. We tell you what we found and what to watch for.

If it is urgent

If the air conditioner stops on a hot afternoon in Bargara

  1. 1Check the switchboard for a dropped breaker or safety switch, and push it up once, then look at the remote for an error code.
  2. 2Leave a breaker that trips again alone, do not open the outdoor unit or the ceiling hatch, and keep children and pets away from it.
  3. 3When you ring 0741 536 493, tell us the street, whether the system is wall mounted or ducted, and any error code shown on the remote.
Call 0741 536 493

Common questions

Frequently Asked Questions

What work do you do?

We do electrical, solar and air conditioning work. That covers Solar Panel Installation, Solar System Design, Solar Inverter Installation, Solar Battery Storage, Solar Battery Installation, Air Conditioning Installation, Split System Air Conditioning, Electrical Wiring and Electrical Maintenance. Each one has its own page on this site.

Which places do you work in?

We work in Bundaberg, Bundaberg Central, Walkervale, Svensson Heights, Woodgate, Kepnock, Moore Park, Bargara, Childers, Norville, Gin Gin and Avondale. If your property is somewhere else nearby, ring and ask, because the list is where we name our work rather than a hard boundary.

Do you work on both homes and businesses?

Yes. The work is much the same in principle, but a shop or an office usually has a bigger switchboard and more circuits to look at. Tell us which kind of property it is when you ring and we will plan the visit around that.

Can you come and look at the property before I decide?

Yes. We can visit to see the switchboard, the meter box, the roof or the wall where the new equipment would go, and talk through the options with you. Visits are booked by phone or through the form on the contact page.

Can you design a solar system around how my household uses power?

Yes, that is what Solar System Design is for. We look at the roof, the direction it faces, any shade, the switchboard and the meter, and talk with you about when the household uses most of its power. The layout is worked out from those things rather than from a standard package.

Can I add a battery to the solar system I already have?

In most cases, yes. We start by looking at the existing inverter and how the system is wired, because that decides which type of battery can be fitted and where it connects. Once that is clear, we talk through the options and where the battery would sit.

Will a battery keep my house running in a blackout?

It depends on how the battery and inverter are wired, because not every setup runs the house when the grid is off. Some are set up to feed only a few circuits, such as the fridge and lights, while others cover more. We explain which circuits would stay on before anything is fitted.

Does a solar system need approval before it is switched on?

Grid connected solar in Queensland needs an application to the local network, which around Bundaberg is Ergon Energy Network. It is dealt with as part of the job, and the system is switched on only once that is sorted out. We explain where yours is up to when we hand it over.

What is the difference between a split system and a ducted system?

A split system is one indoor unit on a wall, joined by pipework and cable to an outdoor unit, and it cools the room it sits in. A ducted system has one outdoor unit and ducts running through the roof space to vents in several rooms. We can talk through which suits your house after seeing the layout and the roof space.

Where do the indoor and outdoor units of an air conditioner go?

The indoor unit goes high on a wall with room to blow across the space. The outdoor unit sits on a bracket or a slab outside, as close as is sensible, and needs clear space around it so air can move. We check both positions, and the run of pipework between them, before any work starts.

Will my switchboard need work to take a new air conditioner or battery?

Sometimes, and sometimes not. We open the switchboard first and look at the main switch, the spare ways and the earthing, then tell you whether the new equipment can connect as it is. If the board needs work, we say so before the job starts.

What does electrical maintenance involve?

It starts with looking at what is already there: the switchboard, the switches, powerpoints and light fittings, and any equipment you are worried about. We test what we can reach and tell you what we find. If something needs replacing, we talk it through with you first.

Local, and on the phone

Tell us about your Bargara home

Tell us whether the house has one storey or two. That decides what ladder or access we bring and how we plan the visit.

0741 536 493

24 hours a day, 7 days a week

Not urgent? Send us the job instead