Solar Inverter Installation in Bundaberg, QLD
What is included
What Is Included in Our Solar Inverter Installation
- We choose a wall for the inverter that is shaded, ventilated and close to the switchboard.
- We switch off at the board and the DC isolator, then take down the old inverter if there is one.
- We mount the new inverter on the wall and fix its bracket into solid framing, not just the cladding.
- We connect the panel strings to the inverter's DC inputs and check the polarity and voltage on each string first.
- We run the AC cable to its own breaker at the switchboard and fit an AC isolator beside the inverter.
- We connect the inverter to your home network so it can be monitored, if you want that.
- We commission the inverter, check that it starts, syncs to the grid and shows the panels producing.
- We take the old inverter and the packaging away, then show you the display and the switches.
Why us
Why Choose Us for Solar Inverter Installation?
Accountable for every job, long after the day
Every solar inverter installation job is done by the people who will still be here next year.
Tested and signed off before we leave
Everything we touch on your solar inverter installation is tested before we go, you get walked through exactly what was done.
Local electricians, not a call centre
An electrician answers the phone and the same faces come back if the job runs over a day.
How the job runs
An inverter lives or dies by its position
The first phone call
Tell us what the old inverter is doing, or what you are adding. A flashing fault light, a unit that has gone quiet and a system being extended all lead to different jobs. We ask for the make on the label if you can read it, and how many roof faces feed it.
Checking the wall and board
We look at where the current inverter hangs, where the new one would sit and how the cables get there. Heat on a north or west wall matters in Bundaberg. We check the switchboard has room for the AC breaker and talk through the options for the type of inverter. Any network connection application to Ergon Energy Network is dealt with alongside the change.
Swap day and handover
On the day we shut the system down, remove the old unit and mount the new one. We wire the DC and AC sides, then commission it and watch it start producing. You see it running before we leave, and we show you the isolators in case you ever need to switch it off.
Common questions
Frequently Asked Questions
What work do you do?
We do electrical, solar and air conditioning work. That covers Solar Panel Installation, Solar System Design, Solar Inverter Installation, Solar Battery Storage, Solar Battery Installation, Air Conditioning Installation, Split System Air Conditioning, Electrical Wiring and Electrical Maintenance. Each one has its own page on this site.
Which places do you work in?
We work in Bundaberg, Bundaberg Central, Walkervale, Svensson Heights, Woodgate, Kepnock, Moore Park, Bargara, Childers, Norville, Gin Gin and Avondale. If your property is somewhere else nearby, ring and ask, because the list is where we name our work rather than a hard boundary.
Do you work on both homes and businesses?
Yes. The work is much the same in principle, but a shop or an office usually has a bigger switchboard and more circuits to look at. Tell us which kind of property it is when you ring and we will plan the visit around that.
Can you come and look at the property before I decide?
Yes. We can visit to see the switchboard, the meter box, the roof or the wall where the new equipment would go, and talk through the options with you. Visits are booked by phone or through the form on the contact page.
Can you design a solar system around how my household uses power?
Yes, that is what Solar System Design is for. We look at the roof, the direction it faces, any shade, the switchboard and the meter, and talk with you about when the household uses most of its power. The layout is worked out from those things rather than from a standard package.
Can I add a battery to the solar system I already have?
In most cases, yes. We start by looking at the existing inverter and how the system is wired, because that decides which type of battery can be fitted and where it connects. Once that is clear, we talk through the options and where the battery would sit.
Will a battery keep my house running in a blackout?
It depends on how the battery and inverter are wired, because not every setup runs the house when the grid is off. Some are set up to feed only a few circuits, such as the fridge and lights, while others cover more. We explain which circuits would stay on before anything is fitted.
Does a solar system need approval before it is switched on?
Grid connected solar in Queensland needs an application to the local network, which around Bundaberg is Ergon Energy Network. It is dealt with as part of the job, and the system is switched on only once that is sorted out. We explain where yours is up to when we hand it over.
What is the difference between a split system and a ducted system?
A split system is one indoor unit on a wall, joined by pipework and cable to an outdoor unit, and it cools the room it sits in. A ducted system has one outdoor unit and ducts running through the roof space to vents in several rooms. We can talk through which suits your house after seeing the layout and the roof space.
Where do the indoor and outdoor units of an air conditioner go?
The indoor unit goes high on a wall with room to blow across the space. The outdoor unit sits on a bracket or a slab outside, as close as is sensible, and needs clear space around it so air can move. We check both positions, and the run of pipework between them, before any work starts.
Will my switchboard need work to take a new air conditioner or battery?
Sometimes, and sometimes not. We open the switchboard first and look at the main switch, the spare ways and the earthing, then tell you whether the new equipment can connect as it is. If the board needs work, we say so before the job starts.
What does electrical maintenance involve?
It starts with looking at what is already there: the switchboard, the switches, powerpoints and light fittings, and any equipment you are worried about. We test what we can reach and tell you what we find. If something needs replacing, we talk it through with you first.
Related work
Other jobs we get called out for
solar battery storage
We help you work out what a battery would do for your house, sized around your evening use and what must keep running in a blackout.
Read moreair conditioning installation
We fit wall splits, ducted and multi head systems, from choosing the system for your rooms to wiring it in and testing it.
Read moresplit system air conditioning
We fit a single wall mounted split system in one room, choosing the spot on the wall and running the pipes to the outdoor unit.
Read moreServing Bundaberg and The Surrounding Areas
Where we work
Ready when you are
Book Solar Inverter Installation in Bundaberg Today
Tell us the brand and model on your inverter's label, if you can read it. If you are fitting a new one, tell us where you would like it to go.
0741 536 49324 hours a day, 7 days a week
Not urgent? Send us the job instead
