Solar System Design in Bundaberg, QLD

What is included

What Is Included in Our Solar System Design

  • We read through your power bills with you to see when the house uses power across a normal day.
  • We stand on the ground and look at which way each roof face points and where the shade falls.
  • We get up on the roof where it is safe and check the sheeting, the rafters and room for panels.
  • We open the switchboard and note the main switch, the spare ways and what an inverter circuit would connect to.
  • We work out where the panels would sit on each roof face and how the cable would reach the board.
  • We talk about whether you want room left for a battery later and where it would be fitted.
  • We pick an inverter to suit the layout and choose a cool, shaded wall where it can be mounted.
  • We go through the whole design with you and check it still suits what you want before work is booked.

Why us

Why Choose Us for Solar System Design?

Accountable for every job, long after the day

Every solar system design job is done by the people who will still be here next year.

Tested and signed off before we leave

Everything we touch on your solar system design is tested before we go, you get walked through exactly what was done.

Local electricians, not a call centre

An electrician answers the phone and the same faces come back if the job runs over a day.

How the job runs

A good design is made at the house

01

The first phone call

You tell us what you want from solar, whether that is lower daytime use, a battery later, or power for a shed or a business. We ask about the roof, the age of the house and when you are home. A design starts with how you live, so we keep the call to what we need to arrange a visit.

02

Measuring up on site

We look at the roof from the ground, then from the roof itself where it is safe. We note the direction of each face, the shade and the state of the sheeting. Then we open the switchboard and talk through the options with you, from the panel layout to where the inverter would hang.

03

Agreeing the design with you

Once the site is measured, we go through the layout with you and what each choice changes. We say plainly what we cannot know until the roof is open. When you are happy, we book the install and pass the design to our installers, and the network connection application to Ergon Energy Network follows from it.

Common questions

Frequently Asked Questions

What work do you do?

We do electrical, solar and air conditioning work. That covers Solar Panel Installation, Solar System Design, Solar Inverter Installation, Solar Battery Storage, Solar Battery Installation, Air Conditioning Installation, Split System Air Conditioning, Electrical Wiring and Electrical Maintenance. Each one has its own page on this site.

Which places do you work in?

We work in Bundaberg, Bundaberg Central, Walkervale, Svensson Heights, Woodgate, Kepnock, Moore Park, Bargara, Childers, Norville, Gin Gin and Avondale. If your property is somewhere else nearby, ring and ask, because the list is where we name our work rather than a hard boundary.

Do you work on both homes and businesses?

Yes. The work is much the same in principle, but a shop or an office usually has a bigger switchboard and more circuits to look at. Tell us which kind of property it is when you ring and we will plan the visit around that.

Can you come and look at the property before I decide?

Yes. We can visit to see the switchboard, the meter box, the roof or the wall where the new equipment would go, and talk through the options with you. Visits are booked by phone or through the form on the contact page.

Can you design a solar system around how my household uses power?

Yes, that is what Solar System Design is for. We look at the roof, the direction it faces, any shade, the switchboard and the meter, and talk with you about when the household uses most of its power. The layout is worked out from those things rather than from a standard package.

Can I add a battery to the solar system I already have?

In most cases, yes. We start by looking at the existing inverter and how the system is wired, because that decides which type of battery can be fitted and where it connects. Once that is clear, we talk through the options and where the battery would sit.

Will a battery keep my house running in a blackout?

It depends on how the battery and inverter are wired, because not every setup runs the house when the grid is off. Some are set up to feed only a few circuits, such as the fridge and lights, while others cover more. We explain which circuits would stay on before anything is fitted.

Does a solar system need approval before it is switched on?

Grid connected solar in Queensland needs an application to the local network, which around Bundaberg is Ergon Energy Network. It is dealt with as part of the job, and the system is switched on only once that is sorted out. We explain where yours is up to when we hand it over.

What is the difference between a split system and a ducted system?

A split system is one indoor unit on a wall, joined by pipework and cable to an outdoor unit, and it cools the room it sits in. A ducted system has one outdoor unit and ducts running through the roof space to vents in several rooms. We can talk through which suits your house after seeing the layout and the roof space.

Where do the indoor and outdoor units of an air conditioner go?

The indoor unit goes high on a wall with room to blow across the space. The outdoor unit sits on a bracket or a slab outside, as close as is sensible, and needs clear space around it so air can move. We check both positions, and the run of pipework between them, before any work starts.

Will my switchboard need work to take a new air conditioner or battery?

Sometimes, and sometimes not. We open the switchboard first and look at the main switch, the spare ways and the earthing, then tell you whether the new equipment can connect as it is. If the board needs work, we say so before the job starts.

What does electrical maintenance involve?

It starts with looking at what is already there: the switchboard, the switches, powerpoints and light fittings, and any equipment you are worried about. We test what we can reach and tell you what we find. If something needs replacing, we talk it through with you first.

Ready when you are

Book Solar System Design in Bundaberg Today

Tell us what shades your roof in the afternoon, such as trees or a neighbouring building. If you can, add where the meter box sits on the house.

0741 536 493

24 hours a day, 7 days a week

Not urgent? Send us the job instead