Solar Battery Installation in Bundaberg, QLD

What is included

What Is Included in Our Solar Battery Installation

  • We read the label on your existing inverter to see whether a battery can connect to it.
  • We mark out the wall or floor space for the battery and check it is solid and clear of doors.
  • We open the switchboard and see where the battery circuit and any backup circuits will connect.
  • We fix the bracket or stand to the wall or slab, then lift the battery into place.
  • We run the heavy DC and communication cables between the battery and the inverter, in conduit where needed.
  • We add the battery breaker and isolator, and wire any backup circuit back to the switchboard.
  • We power up the battery, set its limits in the inverter, and test charging and discharging.
  • We connect it to your monitoring, show you how to read it, label the isolators and hand over.

Why us

Why Choose Us for Solar Battery Installation?

Accountable for every job, long after the day

Every solar battery installation job is done by the people who will still be here next year.

Tested and signed off before we leave

Everything we touch on your solar battery installation is tested before we go, you get walked through exactly what was done.

Local electricians, not a call centre

An electrician answers the phone and the same faces come back if the job runs over a day.

How the job runs

Fitting a battery is mostly cables and position

01

The first phone call

Tell us what battery you have chosen, or whether you want us to help choose one. We ask what solar you have, how old the inverter is and where you were thinking of putting it. If the solar is not installed yet, we fit the battery as part of that job.

02

Planning the position

We look at the wall or slab, the run back to the inverter and the switchboard. A battery needs shade, airflow and a clear path for the cable. We talk through the options for the position and for backup circuits. If a network connection application to Ergon Energy Network is needed for the change, we help with that.

03

Fitting day and handover

On the day we mount the bracket, lift the battery on, run the cables and wire the breakers. We then power it up, test charge and discharge, and set up the monitoring. We show you the isolators, leave the area clean and hand the system over.

Common questions

Frequently Asked Questions

What work do you do?

We do electrical, solar and air conditioning work. That covers Solar Panel Installation, Solar System Design, Solar Inverter Installation, Solar Battery Storage, Solar Battery Installation, Air Conditioning Installation, Split System Air Conditioning, Electrical Wiring and Electrical Maintenance. Each one has its own page on this site.

Which places do you work in?

We work in Bundaberg, Bundaberg Central, Walkervale, Svensson Heights, Woodgate, Kepnock, Moore Park, Bargara, Childers, Norville, Gin Gin and Avondale. If your property is somewhere else nearby, ring and ask, because the list is where we name our work rather than a hard boundary.

Do you work on both homes and businesses?

Yes. The work is much the same in principle, but a shop or an office usually has a bigger switchboard and more circuits to look at. Tell us which kind of property it is when you ring and we will plan the visit around that.

Can you come and look at the property before I decide?

Yes. We can visit to see the switchboard, the meter box, the roof or the wall where the new equipment would go, and talk through the options with you. Visits are booked by phone or through the form on the contact page.

Can you design a solar system around how my household uses power?

Yes, that is what Solar System Design is for. We look at the roof, the direction it faces, any shade, the switchboard and the meter, and talk with you about when the household uses most of its power. The layout is worked out from those things rather than from a standard package.

Can I add a battery to the solar system I already have?

In most cases, yes. We start by looking at the existing inverter and how the system is wired, because that decides which type of battery can be fitted and where it connects. Once that is clear, we talk through the options and where the battery would sit.

Will a battery keep my house running in a blackout?

It depends on how the battery and inverter are wired, because not every setup runs the house when the grid is off. Some are set up to feed only a few circuits, such as the fridge and lights, while others cover more. We explain which circuits would stay on before anything is fitted.

Does a solar system need approval before it is switched on?

Grid connected solar in Queensland needs an application to the local network, which around Bundaberg is Ergon Energy Network. It is dealt with as part of the job, and the system is switched on only once that is sorted out. We explain where yours is up to when we hand it over.

What is the difference between a split system and a ducted system?

A split system is one indoor unit on a wall, joined by pipework and cable to an outdoor unit, and it cools the room it sits in. A ducted system has one outdoor unit and ducts running through the roof space to vents in several rooms. We can talk through which suits your house after seeing the layout and the roof space.

Where do the indoor and outdoor units of an air conditioner go?

The indoor unit goes high on a wall with room to blow across the space. The outdoor unit sits on a bracket or a slab outside, as close as is sensible, and needs clear space around it so air can move. We check both positions, and the run of pipework between them, before any work starts.

Will my switchboard need work to take a new air conditioner or battery?

Sometimes, and sometimes not. We open the switchboard first and look at the main switch, the spare ways and the earthing, then tell you whether the new equipment can connect as it is. If the board needs work, we say so before the job starts.

What does electrical maintenance involve?

It starts with looking at what is already there: the switchboard, the switches, powerpoints and light fittings, and any equipment you are worried about. We test what we can reach and tell you what we find. If something needs replacing, we talk it through with you first.

Ready when you are

Book Solar Battery Installation in Bundaberg Today

Tell us where you have in mind for the battery and roughly how much wall space is there. The brand and model on your inverter's label would help us as well.

0741 536 493

24 hours a day, 7 days a week

Not urgent? Send us the job instead