Electrician in Walkervale, QLD

Where we work in Walkervale

Walkervale is a quiet, settled suburb of family streets south of the city centre, mostly built up in the middle of the last century. The work here is almost all houses, one to a block, on level or gently sloping ground. Most jobs are an upgrade to something that has served the household for decades. It might be a switchboard that has run out of room, a house with one old air conditioner and three hot bedrooms, or a plain roof that is ready for panels.

Blocks are a typical suburban size, with a driveway or carport at the front, a fence and a back yard that often holds a clothesline, a shed or a mature fruit tree. In a low set house the roof is reachable from a normal ladder, and the outdoor unit for an air conditioner can sit on the ground beside the wall. The meter box is usually on the side wall by the carport, and the switchboard is either beside it or inside near the back door. Please tell us about any dog, locked gate or car parked in the carport.

Low set houses of that era are mostly timber, fibro or brick, under corrugated iron or tile roofs, with louvre windows and ceilings that are not high. Wiring behind the walls may be cloth or rubber covered, and the switchboard may still hold ceramic fuses or a handful of old breakers. Fibro sheeting from that time can contain asbestos, so we do not drill or cut it until we know what it is. Louvres and low ceilings change how cooling is planned, while simple roofs keep solar layouts straightforward.

What we do here most

What Walkervale houses keep needing

The pattern here is an older house being asked to do more than it was set up for.

Electrical Wiring

Rewiring an old low set house safely

A house with ceramic fuses and cloth covered cable needs the whole picture checked before anything is changed. We open the switchboard first and look at the main switch, the spare ways and the earthing. Then we trace the cable through the roof space and under the floor, work out what can stay, and talk through what should be replaced.

Split System Air Conditioning

One wall unit for a hot louvred living room

Louvre windows leak cool air, and a living room facing west takes the afternoon heat. We look at where the indoor unit can hang without blocking a window, and where the outdoor unit can sit on the ground beside the house. The pipe run on a low set house is short, which keeps the job tidy. We also check the circuit it will join in the board.

Solar Panel Installation

Fitting panels to a plain iron or tile roof

Roofs of this era are usually a simple pitch, which keeps the panel layout plain. We climb up first and check the sheeting or tiles, the roof timbers and which way each side faces. We also note which yard trees shade the roof in the afternoon. The network connection application goes to Ergon Energy Network, and we tell you what fits once we have seen the roof.

Electrical Maintenance

Safety checks on a house built before safety switches

Many houses from this era were built before safety switches and smoke alarms were normal. We check what is in the board, test any safety switch that is there, and look at power points and light fittings for scorching or cracked cable. If something is not up to standard we explain what we found and what it would take to put right.

If it is urgent

If a power point or light stops working in your house

  1. 1Look at the switchboard, find any safety switch or breaker that has dropped, and push it back up once.
  2. 2Leave a switch that trips again alone, keep clear of any cracked or warm power point, and do not cut into wall sheeting.
  3. 3When you ring 0741 536 493 in opening hours, tell us the street, the rough age of the house and whether the board has fuses or breakers.
Call 0741 536 493

Common questions

Frequently Asked Questions

What work do you do?

We do electrical, solar and air conditioning work. That covers Solar Panel Installation, Solar System Design, Solar Inverter Installation, Solar Battery Storage, Solar Battery Installation, Air Conditioning Installation, Split System Air Conditioning, Electrical Wiring and Electrical Maintenance. Each one has its own page on this site.

Which places do you work in?

We work in Bundaberg, Bundaberg Central, Walkervale, Svensson Heights, Woodgate, Kepnock, Moore Park, Bargara, Childers, Norville, Gin Gin and Avondale. If your property is somewhere else nearby, ring and ask, because the list is where we name our work rather than a hard boundary.

Do you work on both homes and businesses?

Yes. The work is much the same in principle, but a shop or an office usually has a bigger switchboard and more circuits to look at. Tell us which kind of property it is when you ring and we will plan the visit around that.

Can you come and look at the property before I decide?

Yes. We can visit to see the switchboard, the meter box, the roof or the wall where the new equipment would go, and talk through the options with you. Visits are booked by phone or through the form on the contact page.

Can you design a solar system around how my household uses power?

Yes, that is what Solar System Design is for. We look at the roof, the direction it faces, any shade, the switchboard and the meter, and talk with you about when the household uses most of its power. The layout is worked out from those things rather than from a standard package.

Can I add a battery to the solar system I already have?

In most cases, yes. We start by looking at the existing inverter and how the system is wired, because that decides which type of battery can be fitted and where it connects. Once that is clear, we talk through the options and where the battery would sit.

Will a battery keep my house running in a blackout?

It depends on how the battery and inverter are wired, because not every setup runs the house when the grid is off. Some are set up to feed only a few circuits, such as the fridge and lights, while others cover more. We explain which circuits would stay on before anything is fitted.

Does a solar system need approval before it is switched on?

Grid connected solar in Queensland needs an application to the local network, which around Bundaberg is Ergon Energy Network. It is dealt with as part of the job, and the system is switched on only once that is sorted out. We explain where yours is up to when we hand it over.

What is the difference between a split system and a ducted system?

A split system is one indoor unit on a wall, joined by pipework and cable to an outdoor unit, and it cools the room it sits in. A ducted system has one outdoor unit and ducts running through the roof space to vents in several rooms. We can talk through which suits your house after seeing the layout and the roof space.

Where do the indoor and outdoor units of an air conditioner go?

The indoor unit goes high on a wall with room to blow across the space. The outdoor unit sits on a bracket or a slab outside, as close as is sensible, and needs clear space around it so air can move. We check both positions, and the run of pipework between them, before any work starts.

Will my switchboard need work to take a new air conditioner or battery?

Sometimes, and sometimes not. We open the switchboard first and look at the main switch, the spare ways and the earthing, then tell you whether the new equipment can connect as it is. If the board needs work, we say so before the job starts.

What does electrical maintenance involve?

It starts with looking at what is already there: the switchboard, the switches, powerpoints and light fittings, and any equipment you are worried about. We test what we can reach and tell you what we find. If something needs replacing, we talk it through with you first.

Local, and on the phone

Tell us about your Walkervale house

Tell us roughly when the house was built and whether the switchboard still has old fuses. That decides what we bring and how we plan the visit.

0741 536 493

24 hours a day, 7 days a week

Not urgent? Send us the job instead