Electrician in Bundaberg Central, QLD

Where we work in Bundaberg Central

Bundaberg Central is the working middle of the city. Bourbong Street runs through it, lined with shops, offices and older brick buildings, and the Burnett River is never far away. We are based here on McLean Street. Most jobs are in shopfronts, upstairs offices, small tenancies and the older houses and units on the side streets. Much of the work happens while the business next door is open, so each job is planned around when the shop is trading.

Access is the main puzzle in the centre. Street parking is limited, and gear often has to come in through a back lane or a loading area. Roofs can be flat or low pitched behind a parapet, reached by an internal hatch or an outside ladder, and sometimes only with the owner's say. Meter boxes and switchboards are often in a back room, a stairwell cupboard or a shared utility space that serves several tenancies. We need to know who holds the key and who owns the roof.

The building stock is old and mixed. Brick and rendered shopfronts from many decades sit beside low rise offices, units and the odd timber house. Older buildings can have thick walls that are hard to run cable through, ceilings with no roof space above them and switchboards that have been added to many times. Flat roofs are open to the sun but usually shared. Parts of the centre near the river have flooded in the past, so we look at how high new gear should be mounted.

What we do here most

What the middle of the city keeps needing

The pattern here is a building with more than one occupant, so every job has to fit around someone else's switchboard, roof or trading hours.

Electrical Maintenance

Tracing circuits in a shared shopfront switchboard

Older shopfronts often have a board that has grown across many tenancies, with unlabelled breakers and mixed generations of wiring. We open the board and look at the main switch, the spare ways and the earthing, then trace which circuit feeds what. We test the safety switches and mark what we find. The next tenant then knows what is what.

Solar Panel Installation

Panels on a flat roof behind a parapet

A flat or low pitched roof behind a parapet can suit panels on frames, but we have to see how the roof is sheeted and where the water drains. We find a safe way up and a route down for the cable to the switchboard. Because the building may be shared, we also check who owns the roof. The layout is agreed once we have seen it up there.

Air Conditioning Installation

Cooling an upstairs office with no roof space

Offices above shopfronts often have a ceiling close under the roof sheets and hot afternoon sun on a western wall. We look at where the indoor unit can go, how the drain will fall, and where the outdoor unit can sit on a wall bracket or a flat roof. Lifting gear over a footpath takes care, so we plan the lift before the day.

Electrical Wiring

Wiring a new tenancy in an old building

An empty shop being fitted out for a new business needs power points, lighting and a board that suits how the space will be used. We look at what the building already has, then plan cable routes through ceilings and walls that were never built for it. Work is done around the other tenants, and every circuit is tested before handover.

If it is urgent

If the lights or cooling fail in your shop or office

  1. 1Check the safety switches and breakers in your switchboard, and see whether other tenants in the building have lost power too.
  2. 2Leave the main switch, shared boards and anything behind a locked cover alone, and keep customers away from damp or sparking fittings.
  3. 3When you ring 0741 536 493 in opening hours, tell us the street, whether you rent or own, and who holds the key to the switch room.
Call 0741 536 493

Common questions

Frequently Asked Questions

What work do you do?

We do electrical, solar and air conditioning work. That covers Solar Panel Installation, Solar System Design, Solar Inverter Installation, Solar Battery Storage, Solar Battery Installation, Air Conditioning Installation, Split System Air Conditioning, Electrical Wiring and Electrical Maintenance. Each one has its own page on this site.

Which places do you work in?

We work in Bundaberg, Bundaberg Central, Walkervale, Svensson Heights, Woodgate, Kepnock, Moore Park, Bargara, Childers, Norville, Gin Gin and Avondale. If your property is somewhere else nearby, ring and ask, because the list is where we name our work rather than a hard boundary.

Do you work on both homes and businesses?

Yes. The work is much the same in principle, but a shop or an office usually has a bigger switchboard and more circuits to look at. Tell us which kind of property it is when you ring and we will plan the visit around that.

Can you come and look at the property before I decide?

Yes. We can visit to see the switchboard, the meter box, the roof or the wall where the new equipment would go, and talk through the options with you. Visits are booked by phone or through the form on the contact page.

Can you design a solar system around how my household uses power?

Yes, that is what Solar System Design is for. We look at the roof, the direction it faces, any shade, the switchboard and the meter, and talk with you about when the household uses most of its power. The layout is worked out from those things rather than from a standard package.

Can I add a battery to the solar system I already have?

In most cases, yes. We start by looking at the existing inverter and how the system is wired, because that decides which type of battery can be fitted and where it connects. Once that is clear, we talk through the options and where the battery would sit.

Will a battery keep my house running in a blackout?

It depends on how the battery and inverter are wired, because not every setup runs the house when the grid is off. Some are set up to feed only a few circuits, such as the fridge and lights, while others cover more. We explain which circuits would stay on before anything is fitted.

Does a solar system need approval before it is switched on?

Grid connected solar in Queensland needs an application to the local network, which around Bundaberg is Ergon Energy Network. It is dealt with as part of the job, and the system is switched on only once that is sorted out. We explain where yours is up to when we hand it over.

What is the difference between a split system and a ducted system?

A split system is one indoor unit on a wall, joined by pipework and cable to an outdoor unit, and it cools the room it sits in. A ducted system has one outdoor unit and ducts running through the roof space to vents in several rooms. We can talk through which suits your house after seeing the layout and the roof space.

Where do the indoor and outdoor units of an air conditioner go?

The indoor unit goes high on a wall with room to blow across the space. The outdoor unit sits on a bracket or a slab outside, as close as is sensible, and needs clear space around it so air can move. We check both positions, and the run of pipework between them, before any work starts.

Will my switchboard need work to take a new air conditioner or battery?

Sometimes, and sometimes not. We open the switchboard first and look at the main switch, the spare ways and the earthing, then tell you whether the new equipment can connect as it is. If the board needs work, we say so before the job starts.

What does electrical maintenance involve?

It starts with looking at what is already there: the switchboard, the switches, powerpoints and light fittings, and any equipment you are worried about. We test what we can reach and tell you what we find. If something needs replacing, we talk it through with you first.

Local, and on the phone

Tell us about your Bundaberg Central building

Tell us what the job is and who owns the building. That decides whether we can start with you or need to hear from the owner first.

0741 536 493

24 hours a day, 7 days a week

Not urgent? Send us the job instead