Electrical Wiring in Bundaberg, QLD
What is included
What Is Included in Our Electrical Wiring
- We walk the house with you and mark where every power point, light and switch is to go.
- We open the switchboard and look at the main switch, safety switches, spare ways and earthing.
- We switch off at the main switch and test that circuits are dead before we touch any cable.
- We drill the framing and pull the cable through the wall and ceiling space, keeping it neatly clipped.
- We fit the power points, switches, light fittings and any separate circuits for appliances, air conditioners or solar.
- We fit the circuit breakers and safety switches in the switchboard and label every circuit.
- We test every circuit with a meter, checking earth, polarity and that the safety switches trip.
- We clear away offcuts, leave the rooms tidy and show you what each new switch controls.
Why us
Why Choose Us for Electrical Wiring?
Accountable for every job, long after the day
Every electrical wiring job is done by the people who will still be here next year.
Tested and signed off before we leave
Everything we touch on your electrical wiring is tested before we go, you get walked through exactly what was done.
Local electricians, not a call centre
An electrician answers the phone and the same faces come back if the job runs over a day.
How the job runs
Wiring is planned in the walls first
The first phone call
Tell us whether this is a new build, a renovation or a fix for something that trips or buzzes. We ask how old the house is and what you want to run, such as an oven, a workshop or an air conditioner. That tells us how much needs opening up.
Walking the house and board
We walk through with you and mark where each point and light will go. We look at the switchboard and the existing wiring, so we know what can stay. Then we talk through the options, from adding a circuit to rewiring a room or a whole house.
The wiring day and handover
We switch off, open up walls or ceilings where needed and run the new cable. The points and breakers go in, and every circuit is tested before the power is switched back on. We leave the rooms clear and show you what is new on the board.
Common questions
Frequently Asked Questions
What work do you do?
We do electrical, solar and air conditioning work. That covers Solar Panel Installation, Solar System Design, Solar Inverter Installation, Solar Battery Storage, Solar Battery Installation, Air Conditioning Installation, Split System Air Conditioning, Electrical Wiring and Electrical Maintenance. Each one has its own page on this site.
Which places do you work in?
We work in Bundaberg, Bundaberg Central, Walkervale, Svensson Heights, Woodgate, Kepnock, Moore Park, Bargara, Childers, Norville, Gin Gin and Avondale. If your property is somewhere else nearby, ring and ask, because the list is where we name our work rather than a hard boundary.
Do you work on both homes and businesses?
Yes. The work is much the same in principle, but a shop or an office usually has a bigger switchboard and more circuits to look at. Tell us which kind of property it is when you ring and we will plan the visit around that.
Can you come and look at the property before I decide?
Yes. We can visit to see the switchboard, the meter box, the roof or the wall where the new equipment would go, and talk through the options with you. Visits are booked by phone or through the form on the contact page.
Can you design a solar system around how my household uses power?
Yes, that is what Solar System Design is for. We look at the roof, the direction it faces, any shade, the switchboard and the meter, and talk with you about when the household uses most of its power. The layout is worked out from those things rather than from a standard package.
Can I add a battery to the solar system I already have?
In most cases, yes. We start by looking at the existing inverter and how the system is wired, because that decides which type of battery can be fitted and where it connects. Once that is clear, we talk through the options and where the battery would sit.
Will a battery keep my house running in a blackout?
It depends on how the battery and inverter are wired, because not every setup runs the house when the grid is off. Some are set up to feed only a few circuits, such as the fridge and lights, while others cover more. We explain which circuits would stay on before anything is fitted.
Does a solar system need approval before it is switched on?
Grid connected solar in Queensland needs an application to the local network, which around Bundaberg is Ergon Energy Network. It is dealt with as part of the job, and the system is switched on only once that is sorted out. We explain where yours is up to when we hand it over.
What is the difference between a split system and a ducted system?
A split system is one indoor unit on a wall, joined by pipework and cable to an outdoor unit, and it cools the room it sits in. A ducted system has one outdoor unit and ducts running through the roof space to vents in several rooms. We can talk through which suits your house after seeing the layout and the roof space.
Where do the indoor and outdoor units of an air conditioner go?
The indoor unit goes high on a wall with room to blow across the space. The outdoor unit sits on a bracket or a slab outside, as close as is sensible, and needs clear space around it so air can move. We check both positions, and the run of pipework between them, before any work starts.
Will my switchboard need work to take a new air conditioner or battery?
Sometimes, and sometimes not. We open the switchboard first and look at the main switch, the spare ways and the earthing, then tell you whether the new equipment can connect as it is. If the board needs work, we say so before the job starts.
What does electrical maintenance involve?
It starts with looking at what is already there: the switchboard, the switches, powerpoints and light fittings, and any equipment you are worried about. We test what we can reach and tell you what we find. If something needs replacing, we talk it through with you first.
Related work
Other jobs we get called out for
electrical maintenance
We test your switchboard, safety switches, smoke alarms and wiring, find faults while they are small, and repair what needs it.
Read moresolar panel installation
We fit solar panels to your roof, wire them into your switchboard and test the whole system before we hand it over to you.
Read moresolar system design
We work out what solar suits your house, from the roof faces and shade to the inverter position and room for a battery later.
Read moreServing Bundaberg and The Surrounding Areas
Where we work
Ready when you are
Book Electrical Wiring in Bundaberg Today
Tell us the room or the circuit you want added or fixed, and roughly how old your switchboard is.
0741 536 49324 hours a day, 7 days a week
Not urgent? Send us the job instead
